Need help?Do you have a question about the IKA ULTRA-TURRAX T 25 digital and is the answer not in the manual?
General| Speed Range | 3000 - 25000 rpm |
|---|---|
| Control | Digital |
| Timer | Yes |
| Temperature display | No |
| Process type | Batch |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80 % |
| Frequency | 50/60 Hz |
| Noise level | 75 dB(A) |
| Volume range (H2O) | 0.2-2 L |
| Viscosity max. | 5000 mPas |
| Speed display | LED |
| Speed deviation | 1 % |
| Timer display | LED |
| Shaft material | Stainless steel |
| Display | LED |
Indicates an extremely hazardous situation, which, if not avoided, will result in death, serious injury.
Indicates a hazardous situation, which, if not avoided, can result in death, serious injury.
Indicates a potentially hazardous situation, which, if not avoided, can result in injury.
Indicates practices which, if not avoided, can result in equipment damage.
Read operating instructions, ensure trained staff, follow guidelines, and adhere to safety regulations.
Wear PPE for protection against splashing, evaporation, and entanglement hazards.
Avoid static discharges, use only approved accessories, and disconnect power before fitting parts.
Unpack the device carefully and report any damage immediately.
Mount the extension arm to the stand using screws for stable operation.
High-speed dispersing and emulsifying unit for free-flowing and liquid media.
Adjust speed using knob, ensure dispersion element is properly fitted and immersed.
The drive unit is maintenance-free; clean with water or isopropyl alcohol.
List of approved dispersion tools and their specifications for optimal performance.
Details error codes (Overtemperature, Speed variation, Undervoltage) and their solutions.
Covers 24-month warranty period and conditions for claims.
To Next Page