EasyManua.ls Logo

iKarus C 42 Series - Control Surface Deflections

iKarus C 42 Series
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C42 SERIES Pilot Operating Handbook
POH Issue 4 Rev. 5 Page 54 of 91
c.) Control surface deflections
Note: The angle of the aileron bottom relative to the wing chord is -
(tangent front to rear spar).
It is defined by the length of the aileron push rods.
-5°
Distance from axis of rotation
Aileron
Neutral -7°±-1° -1.38” ± 0.39” (-35 mm ± 10 mm)
Up 20°±-2° 3.54” ± 0.39” (90 mm ± 10 mm)
Down 14°±-2° 2.76” ± 0.39” (70 mm ± 10 mm)
Measuring point distance from the steering axis: ............... 9.84” (250 mm)
Spade settings on the aileron in the C42C and C42CS model
Spade angle in relation to the QR-bottom ...................................... +3° ± 1°
Measurement with water level at base of 1 cm under aileron end strip

Table of Contents

Related product manuals