The StellarMate X Manual
108
/
260
to store the defect map for future use.
3. View Masters:
Inspect master frames of a specific camera.
Mount
The Mount module allows you to do Meridian Flips and set limits for your Mount, it has the
following features:
·
Manage / Select
Optical trains
.
·
Tracking On/Off
·
Mount Park/UnPark
·
Meridian Flip
o
Flip if HA >
: Request a meridian flip if the hour angle exceeds the specified
value. Capture and Guiding will be suspended and resumed after the flip is
complete.
o
Pier
Side:
Shows the pier side direction.
·
Limit Settings:
You enable Altitude Limits or Hour Angle Limits if you do not wish your
mount to move past a specific limit. The values are expressed in hours. Setting a 1 hour
(HA) limit means your mount is restricted to 15 degrees east and west of the meridian.
To Next Page
Loading...