iKarus StellarMate X - Updating Stellarmate Software

The StellarMate X Manual
149 / 260
You can perform the following functions:
· Change Name: You can change device name (and its hostname) to another name
without any spaces. For example, if you rename it to myobservatory, the host name
shall be changed to http://myobservatory.local .
· Change Hotspot WiFi band (2.4GHz, 5GHz, or Automatic)
· Connect to WiFi / Forget WiFi
o Connect to Home WiFi : Select a WiFi network as detected by StellarMate and
then supply the password if it is protected. After a successful connection, please
wait up to 2 minutes before using any of the unit functions again.
o Forget WiFi: WiFi network information is removed and StellarMate reverts to
HotSpot mode (IP Address 10.250.250.10). If the Unit is connected to your LAN
via Ethernet, you can still access it via its LAN IP address like before.
· Access Web Manager
· Access VNC Viewer
· Restart Device
· Shutdown Device
Software:
· Switch between Stable and Beta builds
· Update StellarMate Software
Updating StellarMate Software
When there is an update available for StellarMate, an icon will show up on Device tab.