iKarus StellarMate X - Connecting Ccds

The StellarMate X Manual
186 / 260
After you pair your device, you should have a bluetooth ported assigned to it
(e.g. /dev/rfcomm0 ). This is the port you should use in INDI when communicating with
your device.
Connecting CCDs
StellarMate X supports a broad range of camers (CCD/CMOS). Find out if your camera is
supported in the INDI Camera Portal .
StellarMate X includes 4 USB 3.0 ports, it natively supports USB 3.0 cameras using full
bandwidth.
Cameras' power can be either external (AC) or internal (battery) or supplied by the USB
bus connection. They can be either connected directly to StellarMate or to to an external
USB hub.
IMPORTANT
Unreliable & Unstable Power is the primary cause for majority of camera issues.
Ensure the camera is properly powered to avoid instabilities. StellarMate
controller ships with a 3A 5v power adapter. StellarMate OS users should invest in
a similar adapter.
The classes of cameras supported by StellarMate:
· CCD Cameras.
· CMOS Cameras.
· Web Cameras.