The StellarMate X Manual
219
/
260
Fuji Fujifilm X-T3
Image Capture, Liveview, Configuration
Fuji Fujifilm X-T30
Liveview
Fuji Fujifilm X-T4
Image Capture, Liveview, Configuration
Fuji Fujifilm X100F
Fuji Fujifilm X100V
Liveview
Fuji Fujifilm X30
Fuji Fujifilm X70
Fuji GFX 50 R
Image Capture, Liveview, Configuration
Fuji GFX 50 S
Image Capture, Liveview, Configuration
Fuji IX-1
Image Capture, Liveview
Fuji MX-1200
Configuration
Fuji MX-1700
Configuration
Fuji MX-2700
Configuration
Fuji MX-2900
Configuration
Fuji MX-500
Configuration
Fuji MX-600
Configuration
Fuji MX-700
Configuration
Fuji S5 Pro
Image Capture, Configuration
Fuji X (WLAN)
Image Capture, Liveview, Configuration
Experimental
FujiFilm @xia ix-100
Image Capture
Troubleshooting
In case the camera fails to connect or capture, please make sure of the following:
·
Make sure the battery in the camera is full.
·
Make sure the SD card in the camera has enough space.
·
Make sure camera is set to Bulb/Manual mode. You might need to rotate the dial to
Bulb or Manual and then adjust camera settings to enable BULB mode.
·
Turn off any power-saving feature of the camera that might cause it to hibernate or
sleep. Some cameras support adjustable inactivity timers before automatically turning
off. Set such timers to 15 minutes or more.
·
Try a different USB cable.
To Next Page
Loading...