iKarus StellarMate X - Device Information; Adding New Profile

The StellarMate X Manual
235 / 260
Note
Interacting with the StellarMate Web Manager is usually not necessary since both
Ekos and the StellarMate App can operate the equipment profiles directly. The
Web Manager is useful when you are not using the StellarMate App and need to
remotely manager the drivers directly.
Device Information
The device information button brings up an information popup to show the following
information:
· StellarMate Unit name.
· StellarMate Unit model.
· StellarMate OS Version.
· List of IP addresses: Connection to StellarMate is usually done via its hostname,
however, you can connect directly via IP address.
Adding New Profile
Before you add a new profile, you need to identify which drivers you need for your
equipment. You can browse all available devices in the INDI Devices page, or you can
simply scroll through the list of available drivers in the Driver selection dropdown. To add a
new profile:
1. Enter the device name
2. Click the Plus button
3. Once the new device is added, select the appropriate drivers from the list. Please note