The StellarMate X Manual
86
/
260
Capture
The Capture module is where you create sequences to capture your targets. In the typical
astrophotography workflow, Capture module is used last after you finished Focusing,
Aligning, and Guiding your target. Let us first define some common terms:
Train
You can Select / Edit the train specifically for Capture module. Each module has it's own
train. Visit
Optical trains
topic for more.
·
Presets:
Specific camera and File Settings. This includes:
1.
ROI, binning
2.
Frame type
3.
Format filter (if any) etc.
4. You need to create a preset with your desired settings and give it a descriptive name
(e.g QHY_HA_300 would refer to using QHY camera using HA filter for 300-second)
exposure.
·
Sequence:
Capture a number of images with the settings specified in a preset.
1. The count field in capture module specify the number of images to capture using that
To Next Page
Loading...