Rear door fixed glass
Note:
It is not necessary to remove the lifting glass for
this operation.
To remove
1 Lower glass and remove trim pad.
2 Remove screw from top of door.
3 Partly remove corner of plastic water shedder.
4 Remove lower screw.
5 Partly detach the glass channel.
6 Lower channel support into door.
7 Remove the glass complete with its seal by tilting
it a little and lift out from vehicle.
To refit
Refitting is a reversal of the removal procedure. Check
glass lift operation.
To Next Page
Loading...
Need help?
General
