Correct cookware position:
Incorrect cookware position:
Multi-Flexi mode 3 + 1 sections
To activate the mode press until you see
the correct mode indicator. This mode
connects three rear sections into one
cooking zone. The one front section is not
connected and operates as a separate
cooking zone. You can set the power setting
for each zone separately. Use two left side
power selectors.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections.
If you use cookware smaller than two
sections the display shows
and after 2
minutes the zone deactivates.
Incorrect cookware position:
Multi-Flexi mode 4 sections
To activate the mode press until you see
the correct mode indicator. This mode
connects all sections into one cooking zone.
ENGLISH
16
To Next Page
Loading...
