IKEA DANDIMPEN - Getting Started and Basic Functions; Setting the Time; Operating Modes; Activating Alarms

English 4
Getting Started
Open lid (1) and insert 3xAA Ni-MH batteries with correct
polarity and/or connect USB cord into connector (2).
Setting time
After USB cable or battery is inserted. Hours will start
blinking.
Increase & decrease hours, minutes and day.
Set value of hours, minutes and day.
After clock is set the product will start in clock mode.
Short press toggles between AM/PM and 24 hrs.
Long press 2 sec: set time.
Mode of operation
Short press toggles mode of operation from “Clock
mode” to “Bluetooth Mode” to “FM Mode”.
Volume down
Volume Up
Clock mode
To activate alarm:
Shortpresstogglesalarm1on/o.
Shortpresstogglesalarm2on/o.