6
Get to know your product
Pairing button
Press to turn on, or long-press to
increase brightness
Press to turn o, or long-press to
decrease brightness
Changing the battery
A red LED light will blink when you
press any button the dimmer/switch
to show that a new battery is needed.
Open the battery lid and replace with a
new AAA/HR03 battery. We recommend
using a LADDA rechargeable battery.
Please note it is sold separately.
Factory reset
To reset and remove all connected
products, quick-press the pairing
button 4 times (within 5 seconds).
Follow steps 1-3 to reconnect your
smart products.
Care instructions
To clean the product, wipe it with
To Next Page
Loading...