Need help?Do you have a question about the IKEA GURSKEN 694.171.62 and is the answer not in the manual?
General| Product name | GURSKEN |
|---|---|
| Article Number | 694.171.62 |
| Category | Indoor Furnishing |
| Color | White |
| Width | 80 cm |
| Material | Particleboard, Plastic edging |
Securely attach the main frame support beams to the floor.
Connect the side panels of the bed frame.
Insert dowels into pre-drilled holes for structural alignment.
Fasten the side panels to the assembled frame.
Mount the headboard onto the bed frame.
Fasten additional internal components to the bed frame.
Ensure all previously installed fasteners are securely tightened.
Attach specialized brackets to the frame for additional support.
Install necessary fittings into the headboard.
Screw the rails for the slatted base into the frame.
Further secure the slatted base mounting rails.
Install the arms for the bed's lifting mechanism.
Attach a bracket to support the base of the bed.
Connect the main frame sections using specified hardware.
Place the slatted base into the assembled bed frame.
Make final adjustments and tighten components.
Position the final support elements for the mattress.
To Next Page