Problem Possible cause Remedy
The exible induction cook‐
ing area does not heat up the
cookware.
The cookware is in the wrong
position on the exible induc‐
tion cooking area.
Place the cookware in the
correct position on the exi‐
ble induction cooking area.
The position of the cookware
depends on the activated
function or function mode.
Refer to "Flexible induction
cooking area".
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Use cookware with diameter
applicable to the activated
function or function mode.
Use cookware with diameter
smaller than 160 mm on a
single section of the exible
induction cooking area.
Refer to "Flexible induction
cooking area".
comes on.
Automatic Switch O oper‐
ates.
Switch o the hob and switch
it on again.
ENGLISH 23
To Next Page
Loading...
