IKEA INSPELNING plug smart - Page 4

4
• Do not leave the Smart plug in direct
sunlight or near any heat source, as it
may overheat.
• Do not subject the Smart plug to wet,
moist or excessively dusty environments
as this may cause damage.
• The range between the steering device
and the receiver are measured in open
air. Dierent building materials and
placement of the units can aect the
wireless connectivity range.
WARNING:
• Do not connect after each other in
sequence.
• Do not cover when in use.
• To disconnect the power, pull the plug.
• Use only indoors in dry areas.
• Do not overload the product.
• Discard the product if damaged.
• For adult use only. This is not a toy and is
not intended for use by children.
Up to 10 smart plugs can be paired with
1 steering device. Make sure to pair them
one at a time. If the smart plugs are close
to each other, disconnect those that have
already been paired from the wall outlet.
Turn on/o your device
Press the On/O button on the smart plug
once to turn it on. Press it once again to
turn it o.
When using a remote: Press the On
button ( | ) to turn the smart plug on.
Press the O button (o) to turn the smart
plug o.
Factory reset your smart plug:
Push the reset button on top of the smart
plug with a pointy object for at least 5
seconds until the LED starts pulsating.
IMPORTANT!
• The Smart plug is for indoor use only
and can be used in temperatures from
0ºC to 35ºC (32°F - 95°F).