To check If the answer is YES If the answer is NO
Install the appliance in the
built-in structure.
No action Follow the assembly instruction for
the proper installation.
Make sure that at rst installa‐
tion or after reversing the
door the appliance stands in
vertical position for at least 4
hours before it is connected to
the power supply.
No action Wait 4 hours before connecting the
appliance to the power supply.
Evaporative tray
Before using the appliance make sure that
melting water outlet is connected to the
evaporative tray above the compressor.
ENGLISH 9
To Next Page
Loading...
