INSTALLATIONINSTRUCTIONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
_ _ ; e ;;;;;s ;;;s;;s¸ c;;;;;;;;;;;;;;; ;s ;;;;x;;;;; ;, w, _ ; _cx;;;;;;;;;;; ;; s;;;;;/ ....
I Disc0nneCt electiican p0we[ at the fUSe box 0r CirCUit
J
131Do_ you already have utility
hooku ps?
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening--
New Utilities" section.
[%_epcse C(xb ne 0_" e[s _ws,,,-,,,,,,,,,,,_Hew@tes
Prepare and route the electrical supply
What type of electrical
connection will you use?
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
Drill a 11/2"(3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.
To Next Page
Loading...
