To check If the answer is YES If the answer is NO
Make sure gasket seals all
around the door when the
door is closed.
No action Refer to the assembly instruction -
door alignment.
Check if there is no collision
between parts/furniture while
opening and closing the door.
No action Refer to the assembly instruction -
door alignment.
Install the appliance in the
built-in structure.
No action Follow the assembly instruction for
the proper installation.
Make sure that at rst installa‐
tion or after reversing the
door the appliance stands in
vertical position for at least 4
hours before it is connected to
the power supply.
No action Wait 4 hours before connecting the
appliance to the power supply.
ENGLISH 9
To Next Page
Loading...
