What to do if my IKEA Ventilation Hood does not work?
If your IKEA Ventilation Hood isn't working at all, start by checking if there's mains electrical power available. Also, make sure the appliance is properly connected to the electrical supply. Turn off the appliance and restart it to see if the fault persists.
Why is my IKEA Ventilation Hood suction not strong enough?
If your IKEA Ventilation Hood isn't sucking up enough air, there are a few things to check. First, make sure the suction speed isn't set too low and adjust it if needed. Also, inspect the metal filters; dirty filters can significantly reduce suction, so clean them in the dishwasher if they're grimy. Finally, ensure that the air vents aren't blocked by anything. Removing any obstructions can improve airflow.
How to fix the light on my IKEA Ventilation Hood?
If the light on your IKEA Ventilation Hood isn't working, begin by checking the light bulb to see if it's broken and replace it if necessary. Also, check that the light bulb has been correctly fitted. If not, fit the light bulb in right way.
General| Number of grease filters | 1 |
|---|---|
| Voltage | 220-240 V |
| Material | Stainless steel |
| Frequency | 50 Hz |
| Type | Wall-mounted |
| Lighting | LED |
To Next Page
