12
NO ESPRESSO COFFEE IS DELIVERED
No water in the tank
The holes in the fil
ter holder spouts are
blocked
The espresso boiler outlet
is blocked
The filter is blocked
The tank is incorrectly in
serted
PROBLEM POSSIBLE CAUSE SOLUTION
Fill the tank with water
Clean the spout holes
Clean as described in the
chapter “Cleaning the
boiler outlet”
Clean as described in the
section “cleaning the filter
holder”
Insert tank correctly
T
HE ESPRESSO COFFEE DRIPS from
the edges of the lter holder
rather than the holes.
The filter holder is insert
ed incorrectly
The espresso boiler gas
ket has lost elasticity
The holes in the filter
holder spouts
Attach the filter holder
correctly and rotate firmly
as far as it will go
Have the espresso boiler
gasket elasticity replaced
at a service centre
Clean the spout holes
T
HE ESPRESSO COFFEE IS COLD
The espresso OK indicator
light was not on when the
coffe switch was pressed
No preheating performed
The cups were not pre
heated
Wait until the OK light
comes on not on when
the coffee switch was
pressed
Preheat as described in
the paragraph “Preheat
ing the appliance”
Preheat the cups by rins
ing them in hot water or
leaving them to rest for
at least minutes on
the cup warmer tray on
the lid
T
HE PUMP IS EXCESSIVELY NOISY
The water tank is empty
The tank is incorrectly in
serted
Fill tank
Insert tank correctly
To Next Page
Loading...