IKEA SUPERKALL User Manual

ENGLISH 10
To check If the answer is YES If the answer is NO
Install the appliance in the
built-in structure.
No action Follow the assembly instruction
for the proper installation.
Make sure that at rst
installa- tion or after reversing
the door the appliance stands
in vertical position for at least
4 hours before it is connected
to the power supply.
No action Wait 4 hours before connecting
the appliance to the power
supply.
Evaporative tray
Before using the appliance make sure that
melting water outlet is connected to the
evaporative tray above the compressor.
Location
To ensure appliance's best functionality, you
should not install the appliance in the nearby
of the heat source (oven, stoves, radiators,
cookers or hobs) or in a place with direct
sunlight. Make sure that air can circulate
freely around the back of the cabinet.
This appliance should be installed in a dry,
well ventilated indoor position.
This appliance should be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate class
indicated on the rating plate of the appliance:
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C

IKEA SUPERKALL Specifications

General

Brand	IKEA
Model	SUPERKALL
Category	Refrigerator
Language	English