1. After insert the plug into main supply, the child lock will be activated. Press and hold the Child Lock key for 3 seconds to deactivate.
ON/OFF
1. Press the ON/OFF key, the screen will display “0″ as in standby mode and the power indicator light will light up. If there is no heat setting selected within 30 seconds, the hob will switch
off automatically without pressing the ON/ OFF key.
2. Press ON/OFF key during operation, the hob will switch off.
Power level setting
1. Press or to control the power level during operation.
2. Press , the power level will go straight to “9″. Press to decrease the power level from “9″ to “1″.
3. Press , the power level will increase from “1”. Press to increase the power level from “1” to “9”.
Lock function
When the cooking zone operate, you can lock the control panel, for example in order to clean the hob. It prevents an accidental change of the power level setting. The hob can still be shut
off by the ON/OFF key.
Activate lock
1. Set wanted power level.
2. Press the Lock key for 3 seconds. The function is activated when Lock key indicator is lit up and a sound is given.
Deactivate lock
1. Press the Lock key for 3 seconds. The function is deactivated when the Lock key indicator goes off and a sound is given.
2. The power level will return to the previous setting.
Child lock function
You can also keep control panel locked when the hob is not operating. This function prevents an accidental operation of the appliance.
Activate the child lock
1. Activate the appliance with the ON/OFF key. Do not set any power level.
2. Press the Lock key for 3 seconds. The function is activated when Lock key indicator is lit up and a sound is given.
3. Deactivate the appliance with the ON/OFF key.
Deactivate the child lock
1. Press the Lock key for 3 seconds. The function is deactivated when the Lock key indicator goes off and a sound is given.
Automatic switch off
The function switches the hob off automatically if:
All cooking zones are switched off.
YOU do not set the power level after switching on the hob within 30 seconds.
YOU do not switch a cooking zone off or you do not modify the power level after 2 hours, or if the overheating occurs (e.g. when a pan boils dry).
Cookware guidance
What pots to use
Only use pots and pans with bottom made from ferromagnetic material which are suitable for use with inductions hobs:
cast iron
enameled steel
carbon steel
stainless steel (although not all)
aluminium with ferromagnetic coating or ferromagnetic plate
To determine if a pot or pan is suitable, check for the symbol (usually stamped on the bottom). You can also hold a magnet to the bottom. If it clings to the underside, the cookware will
work on an induction hob.
To ensure optimum efficiency, always use pots and pans with a flat bottom that distributes the heat evenly. If the bottom is uneven, this will affect power and heat conduction.
How to use
Minimum diameter of pot/pan base for the different cooking areas
To ensure that the hob functions properly, the pot must cover one or more of the reference points indicated on the surface of the hob, and must be of a suitable minimum diameter.
Always use the cooking zone that best corresponds to the diameter of the bottom of the pan.
Cooking zone Recommended cookware diameter [mm]
Front cooking zone 120-200
Rear cooking zone 120-200
Empty or thin-based pots/pans
Do not use empty or thin-based pots/pans on the hob as it will not be able to monitor the temperature or turn off automatically if the temperature is too high, damaging the pan or the hob
surface. If this occurs, do not touch anything and wait for all components to cool down.
If an error message appears, refer to “Troubleshooting”.
Hint/tips
Noise during cooking
When a cooking zone is active, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair the function or life of the appliance. The noise depends on
the cookware used. If it causes considerable disturbance, it may help to change the cookware.
Care and cleaning
Warning! Switch the appliance off and let it cool down before disconnecting it.
To Next Page
Loading...
