Need help?Do you have a question about the IKEA VALLHORN and is the answer not in the manual?
General| Wireless Protocol | Zigbee |
|---|---|
| Operating voltage | 3 V |
| Battery type | CR2032 |
| Indoor/Outdoor | Indoor |
| Power source | Battery |
| Operating temperature | 0°C to +40°C |
Download the IKEA Home smart app for Apple or Android devices to control smart products.
Connect smart products via the IKEA Home smart app and DIRIGERA hub for seamless integration.
Pair the sensor by holding it close to the smart product and pressing the pairing button for 10 seconds.
Without DIRIGERA, a maximum of 10 smart products can be connected to one motion sensor.
A red LED indicates new batteries are needed. Replace with two AAA/HR03 batteries. LADDA rechargeable batteries are recommended.
Quick-press the pairing button 4 times within 5 seconds to reset and remove all connected products.
Wipe the product with a soft dry cloth. Do not use abrasive cleaning agents or solvents.
Operating temperature: -5°C to 40°C. Avoid direct sunlight or heat sources to prevent overheating.
Risk of explosion if battery is replaced by incorrect type. Do not mix batteries. Dispose of used batteries properly.
Includes model, type, input, range, view angle, frequency, output power, and IP class.
Device complies with FCC Rules and IC RSS standards, subject to conditions regarding interference.
Dispose of the item separately from household waste for recycling. Follow local environmental regulations.
To Next Page
