6English
Air quality sensor features
• USB-C power adapter (5.0V, 2.0A) not included.
• Measure PM 2.5 particles
• LED status indicator
Instructions for use
• Connect the power adaptor to the USB-C port.
• The Air quality sensor initiate a start-up
sequence for about 10 seconds.
• When the LEDs stop pulsing, the device is
ready.
LED indicators for air quality (PM 2.5):
Green: 0-35 /Good + Low
Amber: 36-85/OK + Medium
Red: 86- /Not good + High
Pulsing: Start-up mode
Good to know
• Operation temperature: 0°C to 40°C
(32˚F to 104˚F).
To Next Page
Loading...
