15
Step 1: Plug power cable of ikoo e-styler pro into power supply. A short beep will
sound. The device will automatically heat to 210°C during initial use.
Step 2: To turn on the ikoo e-styler pro, press and hold the On/Off button for two
seconds. The indicator light will light up white and the device will automatically heat
to 210°C. The ionic function is automatically turned on with power switch to provide
additional smoothness.
Step 3: Use the +/– buttons to increase or decrease temperature between 150°C,
170°C, 190°C, 210°C and 230°C. Depending on desired temperature, time need-
ed for heating is 1-2 minutes. The display will light up once desired temperature is
reached. The device memory will automatically bring your device to this temperature
at next use.
Step 4: While the brush is heating up, the upper half of the wheel flashes and stops
once desired temperature is reached.
Step 5: Once the display stops flashing, the ikoo e-styler pro is ready for use. Hold the
brush firmly by the handle and keep safe distance from skin and eyes.
Step 6: To facilitate easier styling with particularly thick or curly hair, use of hairclips to
separate out the hair (back, front, sides) is recommended.
Step 7: Use the front heating plates to straighten the hair. Starting with lower layers of
hair, work your way up. Simply take sections of hair and use the ikoo e-styler pro to
slowly and evenly straighten your hair. Repeat until desired result is achieved.
Step 8: To create waves, use the side heating tiles. Press and hold the button on the
lower half of the wheel for 2 sec. and wait for side heating plates to warm up. During
the heating process, this button blinks blue. The temperature of the side heating units is
controlled by the +/– buttons.
Step 9: It is also helpful to divide the hair when styling. Wrap strands around the
e-styler pro and hold for a few seconds and repeat. The knobs on the back of the
e-styler pro do not heat up but help guide the hair.
Step 10: Press and hold the On/Off button for two seconds in order to turn off the
ikoo e-styler pro.
User Manual:
To Next Page
Loading...