4
Technical Data
Power Supply: 230V – 50Hz
120V – 50/60Hz
Maximum Absorbed Power: 230V:2Amp. 160Watt
120V:4Amp. 160Watt
Cutter Motor: Single Phase and Speed
Cutter: HSS Steel
Tool Speed: 8000 rpm
Mass (Weight): 4.5 Kg (10 lbs)
Noise Level: Less than 70db(A)
Graphics on the 008B Machine
Obligatory use of safety
goggles
Read instructions before
use
• At no time should the mechanically-driven parts of the
machine be touched while it is in operation. The
Environmental Condition
To ensure that the best use is made of the 008B key-cutting
machine, certain parameters must be borne in mind:
damp,
badly ventilated sites should be avoided.
The ideal conditions for the machine are:
-
temperature: between 10°C (50°F) and 40°C (104°F);
-
relative humidity: 60% circa;
-
room illumination: approximately 500 Lux
Rotating cutter warning Earth connection
GENERAL INFORMATION
To Next Page
Loading...