iLive IBB683B - Bluetooth Setup and Operation; Pairing a Bluetooth Device; Playing Audio Wirelessly; Clock and Charging Functions

Radio
Tuning the FM Radio
Tuning to a Preset Radio Station
Radio Reception
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Requires a 3.5mm audio cable (included)
1. Connect the 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
2. Press the Source button to switch to
Line In mode.
3. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
Bluetooth Setup
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to
Bluetooth Mode.
The display will show the Bluetooth logo
ashing.
When pairing, remain within 3 feet of the
unit.
If the unit does not automatically begin to
pair, press the Pair button.
3. Using the native controls on your
Bluetooth device, select the “IBB683” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices.
4. When successfully paired, the display will
stop ashing.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired,
follow the above steps again.
If any pairing issues should occur, un-pair
the unit on your Bluetooth device and
follow the above steps again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play, pause or skip the selected track,
use the native controls on the connected
Bluetooth Device or press the Play/
Pause or Tun/Skip buttons.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Playing Audio Wirelessly
Saving a Station as a Preset
1. Press the Source button to switch to FM
Radio mode.
2. Press the Tun/Skip buttons to tune the
radio manually, press and hold to search
for the next available station.
Adjust the position of the Telescopic FM
Antenna to improve FM radio reception.
1. Follow the instructions for Playing the
Radio.
2. Press & hold the Memory button. The
preset number will begin to blink on the
display.
3. Press the Tun/Skip to select a preset
number.
Up to 20 stations may be preset.
4. Press the Memory button to save the
current station to the selected preset.
1. In FM Radio mode, press the Memory and
Tun/Skip buttons to cycle through saved
presets.
Charging
Charging a Device
1. Make sure the unit is plugged into the
wall.
2. Using the appropriate USB charging
cable (not included), connect one end
to the device and the other to the USB
Charging Port on the unit.
Refer to the user’s manual for your
specic device for manufacturers
required charging amperage as well as
determining the appropriate cable for
your device before charging.
3. The device will now charge.
1. If powered on, press the Power button to
turn the unit off.
2. Press and hold the Clock Set button.
3. Press the Tuning+/- buttons to adjust the
hour.
The PM indicator will light when the hour
is set in the PM.
4. Press the Clock Set button.
5. Press the Tuning+/- buttons to adjust the
minute.
6. Press the Clock Set button again to nish
setting the time.
Clock
Setting the Clock
Status Battery Indicator
Fully Charged No light
Charging Red light
Low Battery Flashing red light
Charging the unit
1. Connect the unit to an AC wall outlet.
Charge fully before use.
2. The Battery Indicator will display a red
light when the unit is charging, and turn
off when the unit is fully charged.
Note: Charge the unit at least once a
month to maintain battery integrity even
when not in use.
IBB683B-830-01-IB.indd 2 4/23/2013 2:42:43 PM