11
Pairing to a Bluetooth Device and Playing Audio Wirelessly
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat these steps.
1. With the unit powered ON, press Source (subwoofer) or
(remote) to select Bluetooth Mode, indicated by a
slowly flashing blue light.
2. Press the Pair button on the subwoofer until the pairing indicator begins quickly flashing blue. When pairing,
remain within 3 feet of the unit.
3. Use the controls on your Bluetooth device to select IHTB138 in your Bluetooth settings. If your device requests
a password, enter the default password 0 0 0 0 . Consult the user’s manual for your specific device for more detailed
instructions on pairing Bluetooth devices.
4. When successfully paired, a chime will sound and the pairing indicator will change to a solid blue. Audio should
now be heard through the speakers. Use the controls on the connected Bluetooth Device to select and begin
playing audio.
5. Play, pause or skip audio using the controls on the connected Bluetooth Device or the subwoofer or remote.
Bluetooth Wireless
To Next Page
Loading...
