iLive ISBW326B - Water Resistance Guidelines; Bluetooth Connectivity; Pairing to a Device; Playing Audio

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit
the support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2015 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property
of their respective owners. Specications are subject to change without notice.
INTERNATIONAL SUPPORT
Protect for Today
Sustain for Tomorrow
Made
Green
WATER RESISTANCE
CHARGING THE BATTERY
BLUETOOTH
FM RADIO
Pairing to a Device and Playing Audio
1. Power on the unit by sliding the POWER Switch to the ON position.
The pairing indicator will slowly ash blue beneath the Power switch.
2. Press and hold the Pair button to begin pairing. The pairing indicator will
quickly ash a dark blue light.
When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select ISBW326 in
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices.
4. When successfully paired, the pairing indicator will turn solid dark blue and
an audible chime will sound from the speaker.
5. Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker.
6. Use the controls on the unit or the connected device to play, pause, and
adjust volume.
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
If your device should become
unpaired or you nd it is unable to connect, repeat the above steps.
This unit has an IPX 4 level of water resistance. This makes it suitable for indoor
and outdoor use in the presence of incidental or light exposure to splashing water,
rain, or snow. Water splashing against the enclosure from any angle should have
no harmful eects. It is not recommend to submerge this speaker in water for any
amount of time.
IMPORTANT: To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the water cap on the
rear of the unit. If the water cap is not properly closed, water resistance will be
compromised and could result in damage to the speaker or personal injury.
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included), connect the larger USB plug
to the USB port of a powered on computer or USB power adaptor (not
included).
2. Connect the smaller Micro-USB plug into the Micro-USB port on the back
of the unit. The unit will now charge.
WARNING: DO NOT, UNDER ANY CIRCUMSTANCES,
CHARGE THE SPEAKER WHILE IT IS NEAR WATER, AND
ALLOW AMPLE TIME TO DRY AFTER BEING SPLASHED.
Using Aux In (3.5mm Audio Input)
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the rear of unit and the audio
output/headphone jack on a media player or smartphone.
2. Power on the unit by sliding the POWER Switch to the ON position.
The Pairing Indicator will light green.
3. Use the controls on the connected device to select and play audio.
AUX IN
INDICATOR LIGHT STATUS
Red light ON Charging battery
Red light OFF Charging complete
Red light ashing Low Battery, charge soon
An FM antenna is built into the unit. Adjust the position of the unit to improve
radio reception.
1. Power the unit ON, and press the Source button to switch to FM mode.
2. Press or press and hold the Skip/Tune buttons to adjust to a radio station.
Programming Radio Stations
1. With the unit in FM mode, press the Tune buttons to manually search for a
radio station, or press the Scan button to automatically search for stations.
2. Press the M + button to save the desired station as a preset. Up to 20
stations may be set.
3. Use the M + button to cycle through your memory presets.