iLive ISBW519 - Speaker Operations; Water Resistance; Charging the Battery; Bluetooth Wireless Connectivity

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included). Note: Equalizer settings are not
usable in Aux In Mode.
1. Press
to switch to Aux In Mode, the display will show “Aux” and a
voice will announce “Line in”.
2. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output/headphone jack on an audio device.
3. Use the controls on the connected device to select and play audio.
Microphone
Requires a microphone with a 1/4 in. audio cable or 1/4 in. adapter (not included).
1. Connect a microphone to one of the Microphone Inputs on the unit. The
speaker will play audio from the microphone as long as it is connected.
2. Use the controls on the speaker to adjust microphone volume and eects.
Bluetooth Wireless
Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or
you nd it is unable to connect, repeat the steps listed here.
1. Press the
button to select Bluetooth Mode. The display will read
“blue” and a voice will announce “Bluetooth Mode”.
2. Press and hold
to begin pairing. The display will begin quickly ashing
and a voice will announce “Bluetooth is connecting.” Remain within 3 feet of
the unit.
3. Using the controls on your Bluetooth device, scan for and select ISBW519
in your Bluetooth settings to pair. Refer to the user’s manual for your specic
device for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired, the display will turn solid, a voice will announce
“Bluetooth connected.”
5. Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker. Use the controls on the speaker or the connected
device to play, pause, and adjust volume.
Micro-SD Memory Card
• Load a Micro-SD Card into the Micro-SD card slot port. The speaker will
automatically detect the memory card and switch to SD Card Mode and start
playing.
• Press
to pause or play media.
• Press
to change tracks forward or back. Press and hold to
change 10 tracks forward or back.
FM Radio
Radio Tuning and Saving Station Presets
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
1. Press the
button to switch to FM Radio Mode. The display will show
an FM radio frequency and a voice will announce “FM radio.”
• Press and hold
to automatically scan and save FM stations as presets.
Saved radio stations will be assigned a “Pxx” number.
• Press
to cycle through presets. Press and hold to change
manually search through FM frequencies.
Charging the Battery
To power the unit or charge the internal battery, plug the AC/DC power adapter
into the Micro-USB DC Power Input on the speaker and a standard power outlet.
Battery life is approximately 3 hours.
To charge mobile devices, use an appropriate USB charging cable (not included)
to connect the USB charging port on the unit and the device you wish to charge.
Water Resistance Level IPX4
• Suitable for indoor and outdoor use in the presence of incidental or light
exposure to splashing water, rain, or snow.
• It is not recommend to submerge this speaker in water for any amount of
time.
IMPORTANT: To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the charging port water
cap. If the water cap is not properly closed, water resistance will be compromised
and could result in damage to the speaker or personal injury.
WARNING: DO NOT CHARGE THE SPEAKER OR A MOBILE
DEVICE WHILE IT IS NEAR WATER OR IF IT MAY GET WET.
ALLOW AMPLE TIME TO DRY AFTER BEING SPLASHED.