iLive IVFID10 - Troubleshooting & Error Codes; Error Codes and Descriptions


FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE ERROR DESCRIPTION CONTROL F5
Inadequate water supply
• Make sure the water input tap is totally open and that there is no water cut. • Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the serviceSHUVRQ if the error resumes.
F3
Error of continuous water input
• Close the tap. • Contact the serviceSHUVRQ.
F2
The waste water in the machine cannot be discharged.
• Water discharge hose is clogged. • The filters of your machine might be clogged. • Power off-on your machine and activate the program cancellation command. • If the error continues, contact the serviceSHUVRQ.
F8
Heater error
Contact the serviceSHUVRQ.
F1
Alarm is active against water overflow
• Power off your machine and close the tap. • Contact the serviceSHUVRQ.
FE
Faulty electronic card
Contact the serviceSHUVRQ.
F7
Overheating error (temperature in the machine is too high)
Contact the serviceSHUVRQ.
F9
Divisor position error
Contact the serviceSHUVRQ.
F6
Faulty heater sensor
Contact the serviceSHUVRQ.