3
IMPORTANT INSTRUCTIONS
CAUTION: Please read and save these instructions. Read carefully
before attempting to assemble, install, operate or maintain the
product described. Do not use the control box if any part is damaged
or missing.
Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or
property damage!
Retain instructions for future reference.
General Safety Information
NOTE: To comply with UL507, air circulator is not to be used in
unattended areas.
1. Ensure that the power source conforms to the electrical
requirements of the fan. All wiring must be in accordance with
National Electrical Code (ANSI/NFPA 70-1999).
2. Use this unit only in the manner intended by the manufacturer. If
you have questions, contact the manufacturer at the address or
telephone number listed in the warranty.
3. Before servicing or cleaning unit, switch power off at service panel
and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag to the service panel.
4. Installation work and electrical wiring must be done by a qualified
person in accordance with appliance codes and standards, including
fire-rated construction codes and standards.
To Next Page
Loading...