Need help?Do you have a question about the Imagine SEL-2FS1 and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Type | Fiber to SDI |
| Fiber Type | Single-mode |
| Wavelength | 1310 nm |
| Transmission Distance | 20 km |
| Storage Temperature | -20°C to 70°C |
| Connector Type | LC |
| Data Rate | 2.97 Gbps |
| Humidity | 95% non-condensing |
| Fiber Input | 1x LC |
Lists registered trademarks used in the manual.
Provides contact details and links for Imagine Communications.
Lists various contact points for product support.
Details the manual's scope covering features, installation, operation, and maintenance.
Identifies the target audience for the manual, including engineers, technicians, and operators.
Lists the manual's revision history with dates and changes.
Explains the conventions used in the manual's text and formatting.
Provides steps for inspecting and unpacking the product upon delivery.
States that modules are not designed for field servicing and require return for repairs.
Explains RoHS compliance and lists restricted hazardous substances.
Discusses WEEE directive for proper disposal and recycling of electronic equipment.
Defines warning and caution terms and symbols used throughout the manual.
Introduces the SEL-1XD1/XD1 and SEL-1FS1/FS1 modules and their capabilities.
Lists the main topics covered in the manual related to module features.
Details the input capabilities and supported formats for the modules.
Describes the output capabilities and supported formats for the modules.
Lists the video processing functions and features available on the modules.
Details the audio processing features, including synchronizer, delay, gain, and advanced audio options.
Covers Ancillary (ANC) data processing, including VANC/HANC pass-through and transcoding.
Lists optional software key licenses for enhanced module functionality.
Provides pinout details for the GPI/Serial connector on the back module.
Shows diagrams and pinout details for balanced AES connectors.
Details pinout for analog audio expansion back modules.
Provides an example routing assignment for the EES Video Expander.
Explains internal connectivity between Selenio VEX1/DDA1 modules and FS1/XD1 modules.
Shows connections for the analog audio expansion back module.
Explains how to set the input video source for processing channels.
Describes the auto-routing feature for selecting video sources based on preference.
Details parameters for reporting EDH/CRC errors and video levels.
Explains how to modify black level, luma, chroma gain, and hue.
Details adjustable Y, composite, and GBR levels using clipping controls.
Describes how the color corrector adjusts RGB attributes like gain, offset, and slopes.
Explains gamma correction applied to RGB as a power function.
Reports read-only parameters for ARC mode, offsets, scale, crop, AFD, and VI.
Discusses capabilities for signaling, handling, and insertion of AFD, VI, and WSS.
Describes the ARC modes (upconversion, crossconversion, etc.) shown in the Status menu.
Lists available ARC control selections like Anamorphic, Pillar Box, Letter Box, AFD.
Details options for inserting AFD/VI/WSS codes (Pass, Remove, Auto).
Controls behavior when AFD, VI, or WSS signals are lost.
Explains how to define custom mapping tables for aspect ratio behavior.
Enables visual alignment of parameters for immediate ARC output changes.
Explains how XD1 operates in different conversion modes based on input/output standards.
Describes saving custom ARC settings as presets.
Explains how to recall previously saved ARC settings.
Provides controls to optimize custom ARC settings.
Explains AFD's role in optimal video presentation and its encoding/decoding capabilities.
Ensures AFD codes and image remain synchronized, and discusses potential misalignment causes.
Details how aspect ratio control is based on AFD, VI, or WSS codes.
Lists the video test signal generators available on FS1/XD1 modules.
Explains how to use the on-screen display to show read-only parameters.
Explains how to load and select logo files from the memory card.
Details setting transparency, X, and Y position for raster sizes.
Provides information on storing and playing logo files from memory cards.
Details the installation process for the LogoCreator software.
Explains how to convert graphics files to the .mg2 format using LogoCreator.
Describes transferring created logo files to the memory card and module.
Explains how to set parameters and load logo files for each output standard.
Selects links for de-embedding and embedding data in dual-link standards.
Controls stripping of packet descriptors from the input.
Manages AFD and audio metadata packet preservation or replacement in Proc Bypass mode.
Explains how to change CC and Teletext settings and verify embedded data.
Describes how non-PCM audio signals are detected and processed.
Addresses audio-to-video timing misalignment for non-PCM audio.
Explains embedding audio on a pair-by-pair basis using specific parameters.
Covers controls for output video format and frame rate.
Selects output video format for processing channel outputs.
Details automatic frame rate conversion capabilities for XD1.
Assigns SDI outputs to their respective processing channels.
Describes independent operation of channels in two-channel versions.
Lists supported audio inputs including embedded, AES, and analog.
Discusses optional analog and AES expansion modules for additional audio capacity.
Details the number of audio channels available from various sources.
Explains symbols used in audio status parameters.
Addresses audio delay alignment when using expander modules.
Provides steps to install the advanced audio processing submodule.
Explains the overview of software key license credits for advanced audio processing.
Details modes, latency, MCPS usage, and credit costs for AAP.
Discusses maintaining timing relationships for Dolby-E header and video.
Explains Dolby Digital encoding with AAP internal metadata generator.
Details Dolby E encoding and metadata configuration.
Discusses applying and clearing external metadata properties.
Explains the dual-input Dolby decoder feature for different Dolby modes.
Illustrates decoder behavior with different input combinations.
Provides important notes on the Dual-Input Dolby Decoder feature.
Provides an overview of the DTS Neural Surround UpMix feature.
Details channel configurations for DTS Neural Surround UpMix.
Provides an overview of the DTS Neural Surround DownMix feature.
Lists parameters for DTS Neural Surround Audio DownMix.
Provides an overview of the DTS Neural Surround MultiMerge feature.
Lists parameters for DTS Neural Surround Audio MultiMerge.
Describes options for selecting input modes in DTS Neural Surround Audio MultiMerge.
Provides an overview of the DTS Neural Loudness Control feature.
Lists the four different presets for Loudness Control.
Maps Loudness Control functions to related parameter menus.
Details the parameters for Loudness Control.
Explains symbols used in audio output routing format parameters.
Details alignment of audio delay with AAP delay.
Details channel status bits and their meanings.
Reads the current GPI output active status.
Provides an example of a GPI input script.
Provides an example of a GPI output script.
Reports the current temperature of the module.
Explains factory default reset and serial number reference.
Covers saving, applying, and loading module presets.
Lists FPGA, hardware, software, and advanced audio processing version numbers.
Provides an example of a control script for signal processing.
Details how to enable a parameter control script.
Explains the syntax and structure for writing parameter control scripts.
Provides an overview of software key license credits for advanced audio processing.
Details modes, latency, MCPS usage, and credit costs for AAP.
Lists typical contaminants found on fiber optic connections.
Provides key points to follow before and during fiber connection cleaning.
Steps to inspect fiber ends using a fiberscope.
Provides steps for dry cleaning fiber optic connections using wipes.
Provides steps for wet cleaning fiber optic connections using alcohol and wipes.
Lists fault names and their associated information.
Details fault priorities and their default levels (Minor/Major).
Lists specifications for SDI video inputs.
Lists specifications for SDI video outputs.
Lists specifications for SDI fiber inputs with OP+SFP+RR.
Lists specifications for SDI fiber outputs with OP+SFP+TT+1313.
Lists specifications for composite video inputs.
Lists specifications for serial data ports.
Lists specifications for AES audio inputs.
Lists specifications for AES audio outputs.
Lists specifications for balanced AES expansion module inputs.
Lists specifications for balanced AES expansion module outputs.
Lists specifications for unbalanced AES expansion module inputs.
Lists specifications for unbalanced AES expansion module outputs.
Lists specifications for analog audio expansion module inputs.
Lists specifications for analog audio expansion module outputs.
Lists recommended SD/SDHC micro memory cards for graphics storage.
Refers to a separate document for propagation delay specifications.
Specifies the maximum power consumption of FS1/XD1 modules.
To Next Page
