Need help?Do you have a question about the Imagine Videotek VTM-2400 and is the answer not in the manual?
Lists all supported HD and SD video standards for the VTM-2400.
Provides contact information and procedures for obtaining technical support.
Instructions for checking the received VTM-2400 unit and its contents.
Details how to mount the VTM-2400 unit in a standard equipment rack.
Describes how to connect the VTM-2400 using its back panel connectors.
Steps for configuring the VTM-2400's network (Ethernet) connection.
Explains how to connect and configure the remote control unit.
Defines key terms used in the manual related to display and operation.
Introduction to operating the unit, including panes, controls, and display modes.
Details on accessing, interpreting, and controlling the waveform display.
Front panel controls that directly affect the waveform display.
How to adjust waveform position, sweep rate, magnification, and gain using controls.
How to zoom and monitor individual lines in the waveform display.
Available filter, format, and display options in the waveform menu.
How to access and interpret the vector display and its menu options.
How to configure and display audio, scales, bar graphs, and set audio alarms.
Information on storing presets, system settings, and panel lockout.
Step-by-step guide to navigating the unit's global setup menus.
Overview of tables listing setup menu items and their descriptions.
Settings for selecting video input formats and auto-detection.
Configuration options for waveform and vector display parameters.
Settings for audio inputs, displays, and alarm thresholds.
Settings for display colors, screen saver, and network communication.
How to configure the unit's IP address, subnet mask, and DHCP.
Controls system configurations like panel lockout, password changes, and unit ID.
How to select alarm sensitivity, duration, and types.
Explains sensitivity (CES) and duration for alarm detection.
Specific alarms related to peak audio levels and loss of sound.
Alarms for detecting digital video errors like EDH and CRC HD.
Procedures for resetting the unit to factory default settings.
Procedures for soft reset and cold start after firmware updates.
Table of common issues, their causes, and resolution steps.
Detailed specifications for video and audio inputs, outputs, and standards.
Specifications for control interfaces, display capabilities, and time code.
Electrical, physical, and environmental operating requirements for the unit.
List of standard accessories and available optional features for the unit.
Pinout details for the 37-pin D-Sub analog audio connector.
Pinout details for XGA, GPI, and TALLY connectors.
Pinout details for RJ-11 remote and RJ-45 VFlash connectors.
Step-by-step instructions for installing the RCU-2400 remote control unit.
How to connect the RCU to multiple units and operate it.
Common problems, solutions, and technical specs for the RCU-2400.
To Next Page
General
