Need help?Do you have a question about the IMEON ENERGY IMEON 3.6 and is the answer not in the manual?
General| Model | IMEON 3.6 |
|---|---|
| Power Output (Rated AC Power) | 3.6 kW |
| Max. PV Power | 4.5 kW |
| Number of MPP Trackers | 2 |
| Max. AC Current | 16 A |
| Nominal AC Voltage | 230 V |
| Efficiency | 96% |
| Battery Voltage | 48 V |
| Battery Compatibility | Lead-acid, Lithium-ion |
| Cooling | Fan |
| Protection Degree | IP65 |
| Warranty | 5 years |
| Communication | Ethernet, Wi-Fi |
The system functions as an intelligent inverter for self-consumption solar setups.
Highlights the integrated and compact design of the IMEON system.
Covers Smart Grid, Back-Up, Off-grid, and On-grid functionalities.
Details the intelligent management of the system's battery power.
Emphasizes the simple and rapid Plug & Play installation process.
Notes the system's ease of use and straightforward configuration.
Covers local and remote monitoring of the system's performance.
Explains the information shown on the inverter's LCD screen.
Describes the meaning of indicator lights on the device.
Explains the function of each button on the inverter's interface.
Details how to navigate and select indicators in the system menu.
Explains how to visualize values for different indicator units.
Explains how to read RENEWABLE ENERGY and DC INPUT values.
Provides instructions on activating and deactivating the AC OUTPUT function.
Introduces the IMEON Manager software and its connection to the inverter.
Provides steps for downloading and installing the IMEON Manager application.
Instructions for launching, configuring, and operating the software.
Details the Home and Flow Manager tabs of the software interface.
Covers the Battery Manager and Scan tabs within the software.
Details on serial number, internal temperature, date, and time.
Explains daily, monthly, annual, and total solar production values.
Information on consumption, self-consumption rate, PV, battery, and grid power.
Definitions for AC Grid, AC Output, Battery, and PV Input data.
Describes Smart-Grid, Off-Grid, On-Grid, and Back-Up modes.
Configuration for authorizing or blocking energy injection to the grid.
Settings for allowing grid power to charge batteries.
Setting time windows for grid-based battery charging.
Adjusting the inverter's internal clock and date format.
Configuring the screen timeout for the LCD display.
Choosing between Lead Acid and Lithium battery technologies.
Enabling battery discharge exclusively during non-solar production hours.
Explains DOD settings based on grid state and impact on battery life.
Describes the actions of OK, Reset, Quit, Scan, Stop, Erase, and Export buttons.
Explains messages for setting success, failure, and warnings.
To Next Page
