EN
12
CLEANING AND MAINTENANCE
• Switch the toaster off.
• Disconnect the plug (5) from the socket.
• Let the toaster cool down completely.
• Remove the crumb tray (7) and empty it.
• Clean the tongs (2) and the crumb tray (7) with soap and water or in the dishwasher
without exceeding 55 °C.
• Clean the outer sides (4) with a damp and well-wrung sponge. Dry with a dry cloth.
TROUBLESHOOTING
Should one of the problems indicated occur, adopt the proposed solution:
Problem Solution
The bread is not toasted enough.
Turn the timer knob (8) for additional cooking time.
Wait for the beep to indicate the cooking process is
complete and remove the tong (2).
The new toaster emits smoke.
Let it operate empty the first time it is used, to disperse
the fumes and the typical smell of a new appliance.
DISPOSAL
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The appliance must be disposed of in compliance with EU standard 2002/96/EC.
The recyclable materials contained in the appliance must be collected to prevent
environmental pollution. For further information contact the local waste authority or
the appliance retailer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts please contact IMETEC’s authorised customer
service centre on the Toll-Free Number below or via the website. The appliance is covered
by the manufacturer warranty.
For details, read the attached warranty sheet. Failure to comply with the instructions for use
and maintenance provided in this manual will render the manufacturer’s warranty null and
void.
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
MI001432
0314 (MMYY)
To Next Page
Loading...