IMO Oko 1000 - User Manual

GmbH
V18

Summary

1. Safety Instructions

3. Starting Up the Öko 1000

3.1 Machine Connection

3.4 Cleaning Agent Dosage

3.5 Control Panel Operation

Pre-set Washing Programs

3.6 Cleaning Process Steps

Preparation for Cleaning

Steps before starting the cleaning cycle.

Executing the Cleaning Cycle

How to select and run the cleaning program.

Removing Washed Load Safely

Procedure for safely removing items after cleaning.

4. Operating Summary

Control Key Functions

Main Menu Navigation

Starting a Cleaning Program

4.3 Program Creation and Modification

Program Step Details and Rules

Program Step Details: Rinsing and Drying

4.5 System Setup Options

5. Program Flow

5.1 Cleaning Step Execution

Describes the steps involved in the cleaning phase of a program.

5.2 Rinsing Step Execution

5.3 Drying Step Execution

5.5 Program Example Walkthrough

5.6 Maintenance and Troubleshooting

5.6.1 Foaming Issues

7. Error Messages

Valve and Inlet Errors (A1-A3)

Causes and solutions for valve and inlet blockages.

NTC Sensor Faults (S1-S3;S5)

Errors related to NTC water and air sensor malfunctions.

7. Error Messages (Continued)

NTC Air Break and Overheating Errors (S4;S6, S9, S10)

Errors for NTC air sensors and temperature limit violations.

Water Discharge, Safety, and Ion Exchanger Errors (S15-S17, S20)

Time Overshoot and Door Errors (T1-T5, Door)

Spray Arm and Foaming Errors (S12, S13)

Issues with blocked spray arms and excessive machine foaming.

IMO Oko 1000 Specifications

General

Brand	IMO
Model	Oko 1000
Category	Cleaning Equipment
Language	English