Need help?Do you have a question about the iMoshion TWS In-Ear Headset and is the answer not in the manual?
Earphones turn on when removed from case and turn off when placed back.
Turn on by pressing for 2 seconds; turn off by pressing for 5 seconds.
Earphones auto-connect and enter pairing mode. Select 'iMoshion TWS-i2' on your device.
After initial pairing, earphones auto-connect to the last device within range.
Check battery, charge case and earphones for at least 1 hour.
Ensure both are charged, then reset to factory settings and re-pair.
Check earphone battery, Bluetooth range, and reduce nearby Bluetooth devices.
Check battery, range, ensure no obstacles, and re-pair if necessary.
To Next Page
General
