impact Standard - User Manual

Umbrella-Mount Brackets
INSTRUCTIONS
Page 12
(back cover)
Page 1
(front cover)
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS
to mabel.li@asia.bhphotovideo.com
FOR APPROVAL BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its
intended manner and in its intended environment. Inoperability of the product or
part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTIC-
ULAR PURPOSE. This warranty provides you with specic legal rights, and you
may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2017 Gradus Group LLC. All Rights Reserved.
GG1

Summary

Impact Umbrella-Mount Bracket Models

Standard Umbrella-Mount Bracket Overview

Details the features and components of the Standard Umbrella-Mount Bracket, including its cold-shoe mount and locking mechanisms.

Deluxe Umbrella-Mount Bracket Overview

Details the features of the Deluxe Umbrella-Mount Bracket, highlighting its adjustable cold-shoe and sturdy metal construction.

Setting Up Your Umbrella-Mount Bracket

Mounting Bracket to Light Stands

Instructions on mounting the bracket onto light stands using either the 5/8" stud or threaded screws with adapters.

Mounting Flashes and Fixtures

Guidance on attaching flashes and small lighting fixtures using the cold-shoe mount or threaded fittings.

Attaching and Adjusting Umbrellas

Steps for inserting and securing umbrella shafts into the bracket's socket for optimal light diffusion.

Positioning and Tilting

Instructions on adjusting the flash position and tilting the bracket for desired lighting angles.

Accessories for Impact Brackets

Impact Super Clamp

Description of the Super Clamp as a complement for mounting flashes to various surfaces and tubes.

Impact Sand Bags & Shot Bags (Full)

Details on full sand and shot bags used for anchoring light stands and set walls, featuring saddle-style design.

Impact Sand Bags (Empty)

Information on empty sand bags with zippered closures for custom filling and weight.

One-Year Limited Warranty

Warranty Coverage and Limitations

Details the product warranty period, coverage for defects, and exclusions like misuse or improper installation.

Obtaining Warranty Service

Instructions on how to contact customer service, obtain an RMA number, and return defective products for service.

impact Standard Specifications

General

Material	Steel
Color	Black
Mounting Type	Wall
VESA Compatibility	200x200 to 600x400
Tilt	+5° to -15°