EasyManua.ls Logo

imtmedical CITREX H4 User Manual

imtmedical CITREX H4
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
CITREXH4
Question and Answer IconNeed help?

Do you have a question about the imtmedical CITREX H4 and is the answer not in the manual?

imtmedical CITREX H4 Specifications

General IconGeneral
Brandimtmedical
ModelCITREX H4
CategoryMeasuring Instruments
LanguageEnglish

Summary

Introduction

Intended Use

Safety Instructions

Hazard Representation and Notes

Explains symbols for hazards, cautions, notes, and tips for handling the device.

Personnel Qualifications

Specifies that only trained personnel should operate the device.

Responsibility and Guarantee

Outlines manufacturer's disclaimer for improper use or modifications.

Service Life

States the maximum service life of the device is 10 years.

Symbol Explanation

Start-up

Power Supply

Details how to power the device using mains or integrated battery.

Mechanical Connectors

Describes the physical connections on the device.

Flow Channel

Details the function, measuring range, and accuracy of the flow channel.

Differential Pressure Connector

Explains the differential pressure sensor and its measuring range.

High Pressure Connector

Describes the high-pressure sensor, its range, and usage.

Oxygen Sensor

Details the oxygen sensor's function and measuring capabilities.

Installing the Oxygen Sensor

Provides step-by-step instructions for installing the oxygen sensor.

Electrical Interfaces

Lists and describes the device's electrical connection ports.

Replacing the CITREX Battery

Instructions for the user on how to replace the device's battery.

Operation

Switching Device On/Off

Instructions for powering the device on, off, and forced shutdown.

Screen Lock

How to lock and unlock the device screen.

Dim Screen

Describes the automatic screen dimming feature.

User Controls

Identifies and explains the device's user interface buttons.

Settings

Overview of the device settings menu.

Info Display

Shows device information like owner, software, and calibration date.

Battery Indicator

Visual representation of the battery charge level.

Ethernet Interface

Settings for network configuration via the Ethernet port.

Trigger Settings

Configuration of start and end points for ventilation parameters.

Gas Standard

Selection of gas standards for accurate flow and volume readings.

Gas Type

Setting the type of gas being measured for accurate results.

Gas Humidity

Setting gas humidity, which impacts flow measurement.

Setting the X-axis

Adjusting the time scale for graphical displays.

O2 Calibration

Procedure for calibrating the oxygen sensor.

Profiles

Loading and creating custom device profiles.

Numerical Readings

Displaying current measurement values numerically.

Graphical Readings

Displaying measurement data as graphs.

Filter

Options for filtering readings to improve stability.

Calibration

Zero Point Calibration

Procedure to reset pressure and flow sensors to zero.

Oxygen (O2) Calibration

Methods for calibrating the oxygen sensor.

Calibration with Air

Steps for calibrating the oxygen sensor using air.

Calibration with Oxygen and Air

Steps for calibrating the oxygen sensor using air and oxygen.

Connecting the Device

General Measurement Setup

Ensuring correct tubing and filter usage for accurate flow measurements.

Ventilator Checking Setup

Recommended setup for testing ventilators.

High Pressure Gas Setup

Using the high-pressure sensor for measurements up to 300 mbar.

Profile Editor

Creating a Profile

Guide to creating and saving custom device profiles using a PC.

Configuration Tool

PC Minimum Requirements

Specifies the necessary PC hardware and software for the tool.

Web Server

Accessing the device and its data via a network using a web browser.

Default Connection

Default network settings for direct Ethernet connection.

Configured Connection

Setting up a connection to a network without a DHCP server.

DHCP Connection

Connecting the device to a network via a DHCP server.

Monitoring Option

Accessing real-time measurement data numerically or graphically.

Numerical Readings

Tracking real-time numerical measurement data on a computer.

Graphical Readings

Tracking real-time measurement curves on a computer monitor.

Reading Measurement Data

Saving Data to MicroSD

How to save a snapshot of parameters to the SD card.

Reading Data from SD Card

Instructions for accessing saved data from the microSD card.

Servicing and Care

Preventive Cleaning and Servicing

Routines for maintaining device precision and reliability.

Accessories and Spare Parts

Accessories Table

A list of available accessories and their part numbers.

Disposal

Directives and Approvals

Specifications

Measurement Parameters

Details measurement ranges and accuracy for various gas types.

Interface Definition

Pin assignments and ranges for device interfaces.

Gas Type

Available gas types for measurement and their settings.

Power Supply

Specifications for the device's power supply unit.

Battery Operation

Information on battery operating time and charging.

Appendix

Principle of Flow Measurement

Explains the differential pressure method for flow measurement.

Trigger

Defines triggers for start/end points of cyclical signals.

Flow Trigger

Setting triggers based on flow rate thresholds.

Pressure Trigger

Setting triggers based on pressure changes.

Base Flow

Excludes constant flow from volume calculation.

Delay

Filters signal errors and prevents false triggering.

Measurement Parameters and Units

Lists all measurement parameters and their units.

Gas Standards for Flow and Volume Readings

Supported gas standards for data conversion.

Conversion Factors

Table of conversion factors for various units.

List of Tables

An index of all tables present in the document.

List of Figures

An index of all figures present in the document.

Index

Alphabetical index of topics covered in the manual.