■
How to charge your device
1. Connect your device to X6SPD’s output port using original USB cable or
a certified cable.
2. Turn on the power bank.
3. Disconnect your device once fully charged.
■
What’s in the Box
X6SPD Power bank *1
USB to USB-C cable *1
User Manual *1
Feedback card *1
Travel Waterproof Pouch *1
3. It is normal that X6SPD gets a little warm when multi-device are
charging at the same time.
4. If your device’s battery runs out, the charging speed may get
slower because of the battery self-protection.
■
How to charge X6SPD
1. Charge by computer or certified adapter.
2. The LED digital screen flashes and shows the percentage of remaining
power when the power bank is charging,
3. While the LED digital screen shows “100” and stop flashing means the
power bank has been fully charged.
1. For fast charging X6SPD, please use a imuto power delivery
2.0 USB charger and USB-C 3.0 cable.
2. Incorrect operation will cause short circuit protection, please
charge the X6SPD to unlock the shortcut protection.
3. The LED digital screen only show recharging status while
recharging the power bank and charging devices happen at the
same time.
Note:
English
www.imuto.comwww.imuto.com
- 3 - 4
■
Warranty
18 months warranty starts on purchase date, excluding accessories.
Warranty expired automatically with damage(s) caused by inappropriate
use and/or force majeure.
24 hours email customer support
support@imuto.com
www.imuto.com
■
Warning
Inappropriate use could damage product and cause potential safety
concerns to both human and property.
■
Caution
Use original or
certified cables.
Do not disassemble or
repair it by yourself.
Avoid lightning strikes,
knocking and dropping.
Avoid extreme
temperatures.
Do not expose to water
or chemicals.
Please charge fully every
4 months to extend the
battery life.
To Previous Page
Loading...
