Need help?Do you have a question about the Inateck BTSP-20 and is the answer not in the manual?
General| Brand | Inateck |
|---|---|
| Model | BTSP-20 |
| Speaker Type | Portable Bluetooth Speaker |
| Bluetooth Version | 5.0 |
| Output Power | 5W |
| Battery Capacity | 2000mAh |
| Playtime | 10 hours |
| Charging Time | 3-4 hours |
| Water Resistance | IPX5 |
| Signal-to-Noise Ratio | ≥ 80dB |
| Built-in Microphone | Yes |
| Auxiliary Input | 3.5mm AUX |
| TF Card Support | Yes |
Turns the speaker on and off.
Answers and ends phone calls.
Adjusts audio volume up or down.
Connects to devices via 3.5mm audio cable.
5V Micro USB port for charging the speaker.
Shows speaker status and charging information.
Connects wirelessly to Bluetooth-enabled devices.
Connects to audio sources using a 3.5mm cable.
Manages audio volume levels on paired devices.
Allows answering and ending calls via Bluetooth.
IPX5 rated for splash protection; not waterproof.
Charge the battery using the Micro USB port.
To Next Page