Need help?Do you have a question about the Indel B K CELLAR 36 ECOSMART and is the answer not in the manual?
General| Category | Wine Cooler |
|---|---|
| Model | K CELLAR 36 ECOSMART |
| Capacity | 36 bottles |
| Type | Freestanding |
| Energy Class | G |
| Cooling System | Compressor |
| Noise Level | 39 dB |
| Door Material | Glass |
| Shelves Material | Wood |
| Refrigerant | R600a |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Temperature Range | 5°C to 18°C |
Details the appliance's intended applications and necessary environmental conditions for safe operation.
Covers warnings related to installation, maintenance, general operation, electrical safety, and child supervision.
Highlights restrictions on storing certain items, proper food storage, and refrigerant circuit precautions.
Explains the phenomenon of moisture condensation on glass doors under specific ambient conditions.
Presents detailed technical data including model, dimensions, electrical power, and refrigerant information.
Identifies the risk group associated with the appliance's lamp and provides a caution for nearby labels.
Provides instructions for unpacking, inspecting for transport damage, and preparing the appliance.
Offers advice on placing the appliance in a suitable, well-ventilated area away from heat sources.
Details the necessary checks for the power socket and electrical supply before connecting the appliance.
Illustrates the main components of the wine cellar, including the door, shelves, and control panel.
Identifies and describes the buttons and indicators on the appliance's control panel.
Explains the function of the ageing compartment and ideal temperature settings for wine preservation.
Details how to operate the cellar in dual or single temperature zones and recommended settings.
Describes how to switch the appliance on and off using the dedicated button.
Explains how to control the interior light, including continuous on and automatic modes.
Details how to adjust temperature settings and interpret the LED indicators for different modes.
Describes operation using only the power cord, with thermostat regulation via the operator panel.
Explains operation using the remote control for setting temperature ranges and operating schedules.
Provides instructions on how to use the remote control to set compressor operating periods.
Guides users on how to set the current time using the remote control buttons.
Explains how to select pre-set programs or customize program P4 for specific operating cycles.
Provides information on appliance behavior after power outages and recommended waiting times.
Details the steps for setting custom start and stop times for operating cycles in program P4.
Instructs on how to reset custom programs and return to standard operating mode.
Explains how the SMART SYSTEM uses a card and sensor to manage compressor operation based on room occupancy.
Describes how the interior light behaves when the appliance is used in SMART mode.
Details the connection of POWER and SIGNAL plugs for the appliance and the energy-saving system.
Provides steps to check if the electrical connections for SMART mode are correctly established.
Provides guidelines on how to clean the interior and exterior of the appliance using recommended solutions.
Covers regular checks of the drain, door gasket, and advice on keeping the interior ventilated.
Offers checks for common faults like incorrect plug connection, voltage issues, or temperature settings.
Advises on contacting authorized service centers for repairs and information on spare part availability.
Explains how to find technical information via the rating plate, energy label, and EPREL database link.
Lists essential checks to perform in case of appliance malfunction or faulty operation.
States compliance with WEEE directive and provides guidance on proper disposal of the appliance.
To Next Page
