42
KD 50 ECOSMART - KD 50 ECOSMART G
KD-50-ECOSMART-KD-50-ECOSMART-G_21-09-2018
189A1018
P1 P4P2
-
P3
+
SET
ON
OFF
Open
THE REMOTE CONTROL
The KD equipped with a remote control allows you to set the operation of the compressor to make it
work at certain times of day. Each refrigerator has three periods of use which have already been preset,
and one (P4) which can be programmed by the user. One can set a maximum of two ON/OFF cycles
within 24 hours. The remote control is easy to use. After choosing the programme on the remote control,
just point the remote control at the receiver on the inside of the Minibar (at a distance of about 30-40
cm). Keep the button for the chosen programme on the remote control pressed for at least two seconds:
the Minibar will start to work. The display will display the following symbol.
To Next Page
Loading...
