EasyManua.ls Logo

Indel Webasto Marine Isotherm SAFE 10 PLUS - Safe Placement; Securing the Safe

Indel Webasto Marine Isotherm SAFE 10 PLUS
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFE 10/30 PLUS
14 SAFE10/30_PLUS_26-05-2017
ENGLISH
INSTALLATION
On receipt of the Safe it is necessary to install it, with some simple operations, to make its use possible.
BATTERY INSERTION
Remove the protection cover unscrewing the screw and insert batteries in their proper locations.
Cover
Screw
Batteries
SAFE 10/30 PLUS
SAFE10/30_PLUS_26-05-2017 15
ENGLISH
PLACEMENT
Now it is possible to place the Safe over a piece of furniture or inside a wardrobe, locking it with 2 xing
screws supplied in packing.
The Safe has 8 through holes for xing, 4 on the rear wall and 4 on the horizontal face, to be used at the
installer’s discretion, according to the place where the Safe will be placed.
Note: Lock the Safe in 2 corresponding holes on the diagonal in the same flat.
Screw

Related product manuals