Indesit DEA 700 - PLP 2 - User Manual

DISH WASHING
Service Quick Guide
Service Quick Guide
Indesit Company, Service Department
SQG_DW_23_EN
Steps to complete before starting the autotest cycle:
TAll EOS dishwashers with electronics DEA 700 - PLP 2 - Synchronous and BLAC* Motor
Models Covered:
Entry sequence:
BUILT-IN INSTALLATION
- Switch on with on/off button
- Press P
- Press P
- Switch off with on/off button
- Press P
- Press P
- Switch on with on/off button
- Close the door to start autotest
LCD-DISPLAY:
- Switch on with on/off button
- Switch off with on/off button
- Press button (P) top arrow
- Press button (P) top arrow
- Switch on with on/off button
- Press Start/Pause to start autotest
SELECTOR KNOB:
- Switch on with on/off button
- Switch off with on/off button
(start position different for 3 and 5)
- Turn selector knob to program 5 position (prog. 3)
- Turn selector knob to program 1 position
- Turn selector knob to program 5 position (prog. 3)
- Switch on with on/off button
- Press Start/Pause to start autotest
AUTOTEST EOS DEA 700 - PLP 2 - Synchronous and BLAC* Motor
1/3
1. close dispenser door
2. place a thermometer on drum (not essential for the test)
3. mount clear door - in this case, use a closure device to simulate electrical closure of door - (not es-
sential for the test)
4. complete the autotest entry sequence
5
*
Nota Bene: L N.B.: The procedures for running the autotest, setting water
hardness and rinse aid levels for DEA 700 PLP2 (visually distinguishable
thanks to the new DISPENSER and TUB) differ from before.

Indesit DEA 700 - PLP 2 Specifications