To Next PageTo Next Page
Need help?Do you have a question about the Inepro SunTimer 2400 and is the answer not in the manual?
General| Category | Timer |
|---|---|
| Model | SunTimer 2400 |
| Voltage | 230 VAC |
| Frequency | 50 Hz |
| Display | LCD |
| Timer Range | 1 minute - 24 hours |
Covers the basic introduction to the SunTimer® 2400 device and its programming.
Details the physical characteristics, housing, keys, and display of the SunTimer® 2400.
Explains the operational modes, time segments, and registration facilities of the SunTimer® 2400.
Details the configuration options and programmable functions of the SunTimer® 2400.
Configures the first service indicator for revision requirements based on running hours.
Configures a second service counter that inhibits the device when it counts down to zero.
Sets the device's start mode, allowing internal (Timer key) or external activation.
Manages and resets the cumulative running time counter for the main channel relay.
Manages and resets the counter tracking the number of start pulses received.
Defines the relay output behavior, choosing between signal or pulse output.
Configures the device's start mechanism, allowing activation via an external device.
Sets the display format and what information is shown during various operational states.
Controls whether the main time can be reduced during the prior time period.
Allows or disallows the ability to pause the main time operation.
Determines if the main time continues to count down or stops during a pause.
Configures options for shortening the main time using the STOP key.
Allows or disallows extending the main time duration during operation.
Lists the technical specifications, including voltage, consumption, and relay capacity.
Provides supplementary information including dipswitch settings and connection diagrams.
Explains the functionality of the dipswitches for enabling or disabling buttons and registers.
Illustrates the wiring and external connections for the SunTimer® 2400 unit.
