INETVU® MOBILE SYSTEM QUICK START – NERA & STM
C-COM Satellite Systems Inc. Page 6
Define an access type with the name ―PUBLIC, with read-write maximum access rights and on the
SNMP request‘s modem IP address and net mask.
6. Type the following into the command line “device snmp community PUBLIC rw “modem IP”
“modem net mask”. Press Enter.
7. Type “save config” and Press Enter.
8. To confirm the access setting type “device snmp show”
SNMP management access:
-----------------------
Community String Access IpAddress Subnet
prtg Read only 213.52.18.32 255.255.255.240
public Read/Write 0.0.0.0 0.0.0.0
PUBLIC Read/Write 10.110.2.233 255.255.255.248
To allow SNMP access from subnet modem IP and 255.255.255.255 via local LAN Interface.
9. Type “device manager add snmp 1.0.0.0.0.0.0.0” Press Enter.
10. Type “save config” and Press Enter.
11. To confirm the access setting type “device manager show”
Management access:
------------------
Access Interface IpAddress Subnet
SNMP 3 0.0.0.0 0.0.0.0
SNMP 1 0.0.0.0 0.0.0.0
12. Contact NOC for more information on changing the setting.
To Next Page
Loading...