Inficon 3000 Micro GC - Valve Configuration; Valve Hardware Connections

5 - 34
PN 074-519-P1C
3000 Micro GC Operating Manual
5.3.2 Valve Hardware Connections
1 Assemble the multiposition microelectric valve actuator and controller
connections according to the Valco operating manual.
2 Connect the Serial Port Cable (RS-232) to computer for valve control.
5.3.3 Valve Configuration
The Valco valve driver is built into the EZ IQ software package. For valve
configuration steps, see section 7.3, Configuring EZ IQ to Use a Valco (VICI) Valve,
on page 7-4.