Inficon 3000 Micro GC - Basic Method Development and Creation

7 - 11
PN 074-519-P1C
3000 Micro GC Operating Manual
7.5 EZ IQ Workflow
The following steps outline the workflow for EZ IQ.
1 Basic Method Development and Creating a New Method. See section 7.6 on
page 7-12.
2 Run a Sample. See section 7.7 on page 7-19.
3 Basic Sequencing. See section 7.8 on page 7-20.
4 Scheduling Runs. See section 7.9 on page 7-20.
5 Integrating the Chromatogram. See section 7.10 on page 7-21.
 Add or Edit Integration Events. See section 7.10.3 on page 7-23.
6 Qualify Peaks. See section 7.11 on page 7-26.
7 Calibration. See section 7.12 on page 7-36.
 Perform a Single Level Calibration. See section 7.12.3 on page 7-37.
 Perform a Multiple Level Calibration. See section 7.12.4 on page 7-40.
 Review Calibration. See section 7.12.5 on page 7-41.
8 Generate Standard Reports. See section 7.13 on page 7-42.